[chirp_users] UV5R programming problems

kc6iih at aol.com
Sat Oct 29 17:39:06 PDT 2016


If you want a cable that will always work get them from RTSYSTEMS.
I have no interests in their company.

Jock Soutar KC6IIH
Sent via Samsung Galaxy S7 
on AT&T 4G LTE Smartphone

On Saturday, October 29, 2016 Ken Rugaber (KC9QV) <krugaber at gmail.com> wrote:
What cable is being used?

I had issues with the Baofeng Tech cable on a UV82-HP within the last 6
months. I trimmed the cable to insure a good fit etc. Finally I tried my
Wouxon cable that I also had and it worked like a charm. Since the HT I was
trying to program was a gift for my granddaughter I immediately ordered
another Wouxon cable to give to her. It works on the Kenwood's and other
like radios with the same type connections. 

So I threw away both Baofeng cables and stick with something I know works.



Ken KC9QV

ARRL Accredited Volunteer Examiner
MRAC Accredited Volunteer Examiner
Alger County Michigan ARES AEC
Munising, MI (Spring, Summer & Fall) Grid Square EN66og
South Milwaukee, WI (Winter) Grid Square EN62bv
Member of AARC, HARA, LARS, MAARS, SMARC & ARRL





-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com
[mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Saturday, October 29, 2016 5:49 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] UV5R programming problems

> Anyone got any good ideas? Given that the radio doesn't go into 
> transmit mode when the serial port is open I can't see how it can be 
> bad cable / poor connections.
>

Richard,

I have never had this issue (yet) with any of my Linux distros.
However it seems that you are not alone. A patch was recently submitted for
what seems to be a similar issue. You can review it here.

http://chirp.danplanet.com/issues/4165

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to krugaber at gmail.com at krugaber at gmail.com To
unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jock at kc6iih at aol.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161029/b0843b0f/attachment.html 


More information about the chirp_users mailing list