[chirp_users] Programming IC-2200H

[Ken Rhodes]

I have a 2200 and sprung  $49 for RT systems cd and cable.  I'm sure I could have figured it out after many hours but used cd and cable and loaded radio with all repeaters within 50 miles of my zip code in 4 minutes

Best,

Ken

> On Oct 21, 2016, at 11:35, John Benson <kb3ywn at gmail.com> wrote:
> 
> I have a IC-2000, and my understanding is it can't be programmed via Chirp. I had to do it by hand-manual. Does the IC-2200 have the connection available for the data cable to connect to computer? If not, then I don't think you will be able to use Chirp.
> 
> Good luck,
> John (kb3ywn)
> 
>> On Fri, Oct 21, 2016 at 6:19 AM, Syahrul Saifuddin Md Thakhrim <9w2tng at gmail.com> wrote:
>> Hello there, I would like to learn step-by-step how to program my IC-2200H using Chirp
>> Thank you
>> 
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to John  at kb3ywn at gmail.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ken at ualrhodes at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161021/c4ea8ffa/attachment.html