[chirp_users] Programming IC-2200H

[John Benson]

I have a IC-2000, and my understanding is it can't be programmed via Chirp.
I had to do it by hand-manual. Does the IC-2200 have the connection
available for the data cable to connect to computer? If not, then I don't
think you will be able to use Chirp.

Good luck,
John (kb3ywn)

On Fri, Oct 21, 2016 at 6:19 AM, Syahrul Saifuddin Md Thakhrim <
9w2tng at gmail.com> wrote:

> Hello there, I would like to learn step-by-step how to program my IC-2200H
> using Chirp
> Thank you
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John  at kb3ywn at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161021/57abc8a6/attachment.html