[chirp_users] Baofeng UV -6R programming?

[Bunky]

Yes power on message is set to message but still comes up as welcome.

Thanks for the response on receive only info.

On Nov 16, 2016 6:52 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> On Wed, Nov 16, 2016 at 6:25 PM, Bunky <bunky1267 at gmail.com> wrote:
> > I picked up a Baofeng UV-6R I finally got it programmed, only problems I
> had
> > was the error message sayng 0.0000 was out of limits for my receive only
> > frequencies.
> > but got by that.
> >
> > Now I would like to change my Welcome message but I can't get it to
> change.
> > settings are set in my files but when I got to load the radio it goes
> back
> > to the default.
> >
> > Anyone have a fix for this ?
>
> Bunky,
>
> To program a receive only channel set Duplex to "off".
>
> The "Welcome message" works fine for me. Do you have the Power-On
> Message setting set to Message?
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to bunky1267 at gmail.com at bunky1267 at gmail.com
> To unsubscribe, send an email to chirp_users-unsubscribe@
> intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161116/88e2c751/attachment.html