[chirp_users] programming Yaesu FT2D

[David Ranch]

RT Software will ONLY work with their custom programmed FTDI cables.  
With that said, it's very simple to reprogram FTDI devices to have the 
RT Systems VID:PID and that should work just fine.  Once done, you can 
program back the standard FTDI serial port VID:PID numbers.

Btw, I was reading the FT2 manual closer and on page 161, it seems the 
radio can be upgraded with a basic micro-USB cable or via the SCU-19 
cable.  I don't know if the radio can be programmed with the plain USB 
cable though.

--David
KI6ZHD


On 11/13/2016 07:19 PM, Bob Boehme wrote:
> I have a FT1D and had similar problem. Cable would not work with RT systems
> software.. had to use a micro sd card with RT program. Put card in radio
> after programming and then uploaded the program from sd card to radio..
> worked well

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161113/13171e73/attachment.html