[chirp_users] programming Yaesu FT2D

[Nigel A. Gunn G8IFF/W8IFF]

Make sure you're a member of the "dialout" and "serial" groups.


> On 13 November 2016 at 11:49 Robert Carter <carterrj at verizon.net> wrote:

> I looked over the CHIRP source code and with the kernel modules "forced" 
> and the FT2D still in "clone' mode, then launched minicom on 
> /dev/ttyUSB0. Set the baud rate to 38400 8N1 -- nada. Nothing to/from 
> the FD2R.
>