[chirp_users] now using Linux

[Jack Schlachter]

Hi - I'm the one trying to use chirp with my Luiton radio. Still same
problem as per last post.
So I had an idea. I was reading about the Linux part on danplanet and
decided to pull out my Linux machine and give my Baofeng a try and maybe if
I can get that to work it would work on my Luiton. So I loaded chirp on
Linux as per instructions and everything went fine. Plugged my radio in and
got : An error has occurred; could not open port /dev/ttyS0: [Errno13]
Permission denied:'/dev/ttyS0'
So I read further on your site and ran "sudo usermod -aG dialout username"
replacing username with mine, closed chirp reopened and tried again with
same results. I have to admit I'm not real Linux savvy. I don't really
understand how you pick a port. When I click the down arrow there's a whole
list of /dev/ttyS? so I took the default chirp pulled up which is obviously
/dev/ttyS0 How do I find out which port my cable is on?
thanks again,
Jack
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160524/1f770bff/attachment.html