[chirp_users] Icom V82 & CHIRP

[Todd Bloomingdale]

Hi Michael,

Your issue is most likely a driver issue of your programming cord. You will
likely need to down grade to the prolific 3.2.0.0 driver. This should take
care if the issue.. Below is the link to the miklor site that has detailed
instructions with driver download link. Let me know how it goes..

BTW.. I grew up in Le Claire so Hi from a fellow QC'er!

http://www.miklor.com/COM/UV_Drivers.php#install

Todd Bloomingdale​-KC9LOX​

Tomah, WI

On Sat, May 14, 2016 at 1:06 AM, Michael Scheel <mws1972 at gmail.com> wrote:

> I get a "unable to probe radio band" error.
>
> =============================
> Michael W. Scheel
> Davenport, Iowa
>
> K0QCS - KCQ0QCS
> ARRL - www.arrl.org
> Davenport (IA) ARC
> Muscatine (IA) ARC
> RCMA IA-011
> Quad-Cities Scale Modelling Society
> DAGOBAH
> USMC Corporal (2531) 1972-1976
> =============================
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to tbloomingdale at gmail.com at
> tbloomingdale at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160514/cf3364f9/attachment.html