[chirp_users] Baofeng UV-82HP

Lee Houde houdatto at gmail.com
Fri Mar 25 11:52:06 PDT 2016


You CAN TEMPORARILY change the power level while in channel mode, but only
for the CURRENT session. On my UV-82 while in channel mode, lock off, if I
press the "#-Lock" key the radio cycles between H-L.  On my UV-82HP while
in channel mode, lock off, if I press the "#-Lock" key the radio cycles
between H-M-L. Both radios were programmed in CHIRP. As previously stated,
this is only a transient power level change. If the channel is changed or
the radio powered off/on the power level reverts back to the power level
programmed for that channel in CHIRP. The power level does NOT revert back
to the programmed setting when transmit is switched  between bands and back
again.

On Fri, Mar 25, 2016 at 2:12 PM, Lee Houde <houdatto at gmail.com> wrote:

> You CAN TEMPORARILY change the power level while in channel mode, but only
> for the CURRENT session. On my UV-82 while in channel mode, lock off, if I
> press the "#-Lock" key the radio cycles between H-L.  On my UV-82HP while
> in channel mode, lock off, if I press the "#-Lock" key the radio cycles
> between H-M-L. Both radios were programmed in CHIRP. As previously stated,
> this is only a transient power level change. If the channel is changed or
> the radio powered off/on the power level reverts back to the power level
> programmed for that channel in CHIRP. The power level does NOT revert back
> to the programmed setting when transmit is switched  between bands and back
> again.
>
> On Fri, Mar 25, 2016 at 1:25 PM, <rdhutch at pacbell.net> wrote:
>
>> Hi.
>>
>> I do not own a UV-82 Hp, but I do have a UV- 82 and I believe they use
>> the same chip set.  If I understand your question correctly, I think you're
>> saying you'd like to be able to toggle between High and Low power while on
>> the same memory channel.  This won't happen.  I'm pretty sure the radio
>> will automatically revert to whatever power level that was set when that
>> channel was programmed.  If you want to have multiple power selections on
>> the same channel whilst in Memory mode, I think your only option is to
>> separately program the same channels  / frequencies in with the various
>> power settings you want.  To change power you will have to go to the memory
>> location that has the desired power level setting pre-programmed.
>>
>> Changing the power setting "on the fly" only works in VFO mode.  This is
>> pretty typical for Baofeng / Pofung radios.
>>
>> 73 de Ray, AE6H
>>
>>
>> ------------------------------
>> *From:* Jesse Boyle <gonehiking74 at gmail.com>
>> *To:* chirp_users at intrepid.danplanet.com
>> *Sent:* Friday, March 25, 2016 1:19 AM
>> *Subject:* [chirp_users] Baofeng UV-82HP
>>
>> I've looked high and low trying to figure this out:
>>
>> Using Chirp I have the tx power set on my radio for each channel.  Now my
>> radio won't let me change the tx power via the menu on the radio.  It
>> changes initially but reverts back immediately.
>>
>> Anyone know what I'm doing wrong?  I'd like to be able to change power
>> whenever I want to.
>>
>> Thanks
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Ray at rdhutch at pacbell.net
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Lee Houde at houdatto at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160325/0bf46a98/attachment-0002.html 


More information about the chirp_users mailing list