[chirp_users] The tale of two Baofengs

[Amnon Zohar]

בתאריך 7 במרץ 2016 23:33,‏ "Robert Taylor" <vawing at gmail.com> כתב:

> just because the firmware numbers are the same it actually may be different
>
> On Sun, Mar 6, 2016 at 10:05 PM, Bob <vk2byf at gmail.com> wrote:
>
>> 2 Baofeng UV-5R one yellow one black.
>>
>> Tried to clone them by turning on the source (yellow one) while holding
>> down the "mon" key. The black one is connected and on. Lights come on
>> but black one stays in factory default.
>>
>> I can read the yellow one no problems Firmware BFS297
>> Black one, Firmware BFB297, same cable same chirp same USB port I get,
>> "Radio refused to send block 0x0000"
>>
>> I have programmed dozens of these beasties with no problem. I have
>> programmed Wouxuns, Yaesus, Icoms, no problem but this one's got be beat.
>>
>> I'm using Linux Mint 17.3 so no driver problems.
>>
>> Over to the Gurus, Thanks de VK2BYF Bob
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Robert Taylor at vawing at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>
>
> --
>
> Sent From Droid Razr Maxx HD
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160307/9daa232a/attachment.html