[chirp_users] Newbie questions - export/import in CSV

Rich Messeder rich.messeder at gmail.com
Tue Jun 28 03:51:05 PDT 2016


I bought what appears to be the same unit, but labeled UV-5RTP (for tri-power, I presume?).

Jim's directions work for me.

In addition, note that once those channels are programmed, then they cannot be changed from the radio controls. However, You /can/ temporarily change the power level. Press #-lock to cycle through the power levels. It seems that once you choose a power level this way, the power setting remains until you reset the power level, turn the radio off|on again, or change programmed channels. In the latter case, the power level goes to the power level programmed for the new channel. I keep mine all programmed to low level, and cycle to higher levels as required. In fact, I wish that the lowest level were 0.5 W, not 1 W. Could not find a way to hack the radio to change that.

~R~ NE1EE
Short email? No html? Here's why: http://emailcharter.org/

On 2016-06-28 10:23:+0000, Stormy via chirp_users wrote:
>Hi there,
>
>So, got the UV-5RHP, and I hear everyone laughing, what diff do these letters at the end, anyways, it seems to be true 3-power with original UV-5R body:
>
><http://www.aliexpress.com/item/Real-8W-BAOFENG-UV-5R-High-Power-Walkie-Talkie-BaoFeng-UV-5RHP-Dual-Band-Two-Way/32444737460.html>http://www.aliexpress.com/item/Real-8W-BAOFENG-UV-5R-High-Power-Walkie-Talkie-BaoFeng-UV-5RHP-Dual-Band-Two-Way/32444737460.html
>
>
>
>Now, is there a way in chirp to:
>
>1) change ALL channels to LOW or HIGH/MED ? it seems very tedious to do one by one, and even if you do, next import from CSV overwrites all values to high it seems.
>
>2) In CSV format power field does not appear to be present, is there a way to export/import POWER field?
>
>3) In CSV there are 4 extra fields compared to software, what are they used for?
>
>
>
>Comment  URCALL  RPT1CALL   RPT2CALL "
>
>thanks.
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>This message was sent to WeatheredSoul at rich.messeder at gmail.com
>To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com




More information about the chirp_users mailing list