[chirp_users] UV-5RA - latest build

Curley Frazier ricknbrook at gmail.com
Wed Jun 8 14:04:55 PDT 2016


Awesome!
On Jun 8, 2016 2:52 PM, "Steve London" <n2icarrl at gmail.com> wrote:

> Success !
>
> It ended up being three issues:
>
> 1) The speaker and mic jacks on my new UV-5RV2+ are not centered. They
> are off by a few mm. Therefore, my programming cable would not seat
> correctly. Trimmed the cable plug with a utility knife until it seated
> properly. Incidentally, my old UV-5RA has the jacks centered.
>
> 2) While trimming the cable plug, I accidentally cut the ground wire.
> After repairing that, the old UV-5RA could be read with CHIRP.
>
> 3) The 2014 version of CHIRP does not talk to the new UV-5RV2+. The
> latest build does work correctly with the UV-5RV2+. Thanks !
>
> A learning experience.
>
> 73,
> Steve, N2IC
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Rick Frazier at ricknbrook at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160608/d56e5067/attachment-0002.html 


More information about the chirp_users mailing list