[chirp_users] Settings to match Motorola PL tones
goldporsche944 at aol.com
Wed Jun 8 06:35:29 PDT 2016
> On Jun 8, 2016, at 9:34 AM, Rick via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
> You also need the offset.
>> On Jun 8, 2016, at 9:26 AM, Jeffrey <fongemie at gmail.com <mailto:fongemie at gmail.com>> wrote:
>> Hey everyone,
>> I'm pretty new to radios in general, and more so programming them, but I'll do my best to get the terminology right.
>> I'm trying to use CHIRP to program a UV-5R so that it can communicate with a Motorola radio on a certain frequency. The Motorola is set to use 151.9400 with a PL tone of 67.0 for both send and receive.
>> PL is the same as CTCSS correct?
>> On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 - and it does not work? The two radios are not communicating. Am I missing something? Something special about Motorola PL tones? Should be a standard right?
>> Thanks for any advice.
>> Jeffrey Fongemie
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
>> This message was sent to Richard Isaacs at goldporsche944 at aol.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> This message was sent to Richard Isaacs at goldporsche944 at aol.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the chirp_users