[chirp_users] Settings to match Motorola PL tones

Rick goldporsche944 at aol.com
Wed Jun 8 06:34:02 PDT 2016

You also need the offset.
> On Jun 8, 2016, at 9:26 AM, Jeffrey <fongemie at gmail.com> wrote:
> Hey everyone,
> I'm pretty new to radios in general, and more so programming them, but I'll do my best to get the terminology right.
> I'm trying to use CHIRP to program a UV-5R so that it can communicate with a Motorola radio on a certain frequency.  The Motorola is set to use 151.9400 with a PL tone of 67.0 for both send and receive.
> PL is the same as CTCSS correct?
> On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 - and it does not work? The two radios are not communicating.  Am I missing something? Something special about Motorola PL tones? Should be a standard right?
> Thanks for any advice.
> Jeff
> -- 
> ______________
> Jeffrey Fongemie     
>  <http://instagram.com/jfongemie>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Richard Isaacs at goldporsche944 at aol.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160608/24a56e42/attachment-0002.html 

More information about the chirp_users mailing list