[chirp_users] UV-5RA - latest build

[Steve London]

Success !

It ended up being three issues:

1) The speaker and mic jacks on my new UV-5RV2+ are not centered. They 
are off by a few mm. Therefore, my programming cable would not seat 
correctly. Trimmed the cable plug with a utility knife until it seated 
properly. Incidentally, my old UV-5RA has the jacks centered.

2) While trimming the cable plug, I accidentally cut the ground wire. 
After repairing that, the old UV-5RA could be read with CHIRP.

3) The 2014 version of CHIRP does not talk to the new UV-5RV2+. The 
latest build does work correctly with the UV-5RV2+. Thanks !

A learning experience.

73,
Steve, N2IC