[chirp_users] Settings to match Motorola PL tones

[Randy Elliott]

Do you have the radio set for simplex operation?

Randy 
VE3JPU at me.com


> On Jun 8, 2016, at 9:26 AM, Jeffrey <fongemie at gmail.com> wrote:
> 
> Hey everyone,
> 
> I'm pretty new to radios in general, and more so programming them, but I'll do my best to get the terminology right.
> 
> I'm trying to use CHIRP to program a UV-5R so that it can communicate with a Motorola radio on a certain frequency.  The Motorola is set to use 151.9400 with a PL tone of 67.0 for both send and receive.
> 
> PL is the same as CTCSS correct?
> 
> On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 - and it does not work? The two radios are not communicating.  Am I missing something? Something special about Motorola PL tones? Should be a standard right?
> 
> Thanks for any advice.
> 
> Jeff
> 
> -- 
> ______________
> 
> Jeffrey Fongemie     
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Skid at ve3jpu at me.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160608/24dcf881/attachment.html