[chirp_users] Settings to match Motorola PL tones

Jeffrey
Wed Jun 8 06:55:21 PDT 2016


Thanks guys,

This is direct, no repeater involved.   This image is a screenshot of what
I have, which does not work?

http://s33.postimg.org/rabqkiulr/chirp.jpg

Jeff

On Wed, Jun 8, 2016 at 9:38 AM, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Wed, Jun 8, 2016 at 9:26 AM, Jeffrey <fongemie at gmail.com> wrote:
> > Hey everyone,
> >
> > I'm pretty new to radios in general, and more so programming them, but
> I'll
> > do my best to get the terminology right.
> >
> > I'm trying to use CHIRP to program a UV-5R so that it can communicate
> with a
> > Motorola radio on a certain frequency.  The Motorola is set to use
> 151.9400
> > with a PL tone of 67.0 for both send and receive.
> >
> > PL is the same as CTCSS correct?
> >
> > On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 -
> and
> > it does not work? The two radios are not communicating.  Am I missing
> > something? Something special about Motorola PL tones? Should be a
> standard
> > right?
> >
> > Thanks for any advice.
> >
> > Jeff
>
> PL is short for Private Line which is Motorola's trademark for CTCSS.
> Like Kleenex or Scotch tape, PL is often used generically for CTCSS.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to fongemie at gmail.com at fongemie at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>



-- 
______________

Jeffrey Fongemie

<http://instagram.com/jfongemie>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160608/5f5e52f0/attachment.html 


More information about the chirp_users mailing list