[chirp_users] Settings to match Motorola PL tones

[Rick]

What?
> On Jun 8, 2016, at 9:34 AM, Rick via chirp_users <chirp_users at intrepid.danplanet.com> wrote:
> 
> You also need the offset.
>> On Jun 8, 2016, at 9:26 AM, Jeffrey <fongemie at gmail.com <mailto:fongemie at gmail.com>> wrote:
>> 
>> Hey everyone,
>> 
>> I'm pretty new to radios in general, and more so programming them, but I'll do my best to get the terminology right.
>> 
>> I'm trying to use CHIRP to program a UV-5R so that it can communicate with a Motorola radio on a certain frequency.  The Motorola is set to use 151.9400 with a PL tone of 67.0 for both send and receive.
>> 
>> PL is the same as CTCSS correct?
>> 
>> On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 - and it does not work? The two radios are not communicating.  Am I missing something? Something special about Motorola PL tones? Should be a standard right?
>> 
>> Thanks for any advice.
>> 
>> Jeff
>> 
>> -- 
>> ______________
>> 
>> Jeffrey Fongemie     
>> 
>>  <http://instagram.com/jfongemie>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com <mailto:chirp_users at intrepid.danplanet.com>
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Richard Isaacs at goldporsche944 at aol.com
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Richard Isaacs at goldporsche944 at aol.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160608/e7331df7/attachment.html