[chirp_users] Settings to match Motorola PL tones

[Jeffrey]

Hey everyone,

I'm pretty new to radios in general, and more so programming them, but I'll
do my best to get the terminology right.

I'm trying to use CHIRP to program a UV-5R so that it can communicate with
a Motorola radio on a certain frequency.  The Motorola is set to use
151.9400 with a PL tone of 67.0 for both send and receive.

PL is the same as CTCSS correct?

On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 - and
it does not work? The two radios are not communicating.  Am I missing
something? Something special about Motorola PL tones? Should be a standard
right?

Thanks for any advice.

Jeff

-- 
______________

Jeffrey Fongemie

<http://instagram.com/jfongemie>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160608/d2d7f6c6/attachment.html