[chirp_users] No response from radio, TM-V71 and DR-235, Debian

[Jack Haverty]

Since I also just started using Chirp I'm no expert, but I had a similar 
first-time experience (Ubuntu 16.04 and Baofeng BF-F8HP).  It turned out 
that all that I had to do was turn up the audio volume on the radio and 
everything started to work fine.

Great program!

73,
/Jack de K3FIV

On 07/22/2016 08:30 PM, CN85rq wrote:
> These are my first attempts at using CHIRP and I'm not having much luck.
>   I've tried connecting to two different radios from two different
> computers with a total of three different CHIRP versions and three
> different cables.  I could easily be missing some tribal knowledge known
> to experienced users, so hopefully someone can point me in the right
> direction for a solution.
>
>
> CONFIGURATION #1
> Computer:   Gigabyte GA-MA790X-UD4P motherboard, MCS9865 serial card,
> running Debian 7 (Wheezy)
> Radio:  Kenwood TM-V71, connected with Kenwood PG-5G PC Serial
> Programming Cable
> CHIRP Version:  0.1.12 (from the Debian repository)
> Symptom:  “Download From Radio” results in a “No response from radio”
> message
> Additional Info:  The timestamp on /dev/ttyS0 updates when the radio is
> turned on.
>
>
> CONFIGURATION #2
> Computer:  Raspberry Pi 1 Model B, running Raspian (Jesse) with Compass
> mods by NW Digital Radio
> Radio:  Kenwood TM-V71, connected (first) with a generic USB-Serial
> cable (unknown chipset) and (second) with a Sabrent CB-FTDI USB-Serial
> cable (FTDI chipset)
> CHIRP Versions:  (first) 0.4.0 and (second) chirp-daily-20160717
> Symptom:  “Download From Radio” results in a “No response from radio”
> message
> Additional Info:  Tested with and without the “console=serial0,115200”
> setting in the /boot/cmdline.txt file
> Additional Info:  Serial speed on radio tested at both 9600 and 19200
>
>
> CONFIGURATION #3
> Computer:  Raspberry Pi 1 Model B, running Raspian (Jesse) with Compass
> mods by NW Digital Radio
> Radio:  Alinco DR-235 MkIII, connected (first) with a generic USB-Serial
> cable (unknown chipset) and (second) with a Sabrent CB-FTDI USB-Serial
> cable (FTDI chipset)
> CHIRP Versions:  (first) 0.4.0 and (second) chirp-daily-20160717
> Symptom:  “Download From Radio” results in a “No response from radio”
> message
> Additional Info:  Tested without the “console=serial0,115200” setting in
> the /boot/cmdline.txt file
>
>
> CONSOLE WINDOW OUTPUT captured for Configuration #2
> root at compass:/usr/local/bin/chirp-daily-20160717# ./chirpw
>
> (process:911): Gtk-WARNING **: Locale not supported by C library.
> 	Using the fallback 'C' locale.
> ./chirpw:135: GtkWarning: gtk_window_realize_icon: assertion
> 'info->icon_pixmap == NULL' failed
>     a.show()
> ERROR: Timeout waiting for data
> ERROR: Giving up
> ERROR: Timeout waiting for data
> ERROR: Giving up
> ERROR: Timeout waiting for data
> ERROR: Giving up
> ERROR: Timeout waiting for data
> ERROR: Giving up
> ERROR: Timeout waiting for data
> ERROR: Giving up
> ERROR: Timeout waiting for data
> ERROR: Giving up
> ERROR: Timeout waiting for data
> ERROR: Giving up
> ERROR: Timeout waiting for data
> ERROR: Giving up
> Traceback (most recent call last):
>     File "/usr/local/bin/chirp-daily-20160717/chirp/ui/mainapp.py", line
> 1430, in mh
>       self.do_download(*args)
>     File "/usr/local/bin/chirp-daily-20160717/chirp/ui/mainapp.py", line
> 691, in do_download
>       radio = settings.radio_class(ser)
>     File
> "/usr/local/bin/chirp-daily-20160717/chirp/drivers/kenwood_live.py",
> line 159, in __init__
>       radio_id = get_id(self.pipe)
>     File
> "/usr/local/bin/chirp-daily-20160717/chirp/drivers/kenwood_live.py",
> line 121, in get_id
>       raise errors.RadioError("No response from radio")
> chirp.errors.RadioError: No response from radio
>
> root at compass:/usr/local/bin/chirp-daily-20160717#
>
>
> CONSOLE WINDOW OUTPUT captured for Configuration #3
> root at compass:/usr/local/bin/chirp-daily-20160717# ./chirpw
>
> (process:980): Gtk-WARNING **: Locale not supported by C library.
> 	Using the fallback 'C' locale.
> ./chirpw:135: GtkWarning: gtk_window_realize_icon: assertion
> 'info->icon_pixmap == NULL' failed
>     a.show()
> ERROR: -- Exception: --
> ERROR: Traceback (most recent call last):
>     File "/usr/local/bin/chirp-daily-20160717/chirp/ui/clone.py", line
> 249, in run
>       self.__radio.sync_in()
>     File "/usr/local/bin/chirp-daily-20160717/chirp/drivers/alinco.py",
> line 196, in sync_in
>       self._mmap = self._download(self._memsize)
>     File "/usr/local/bin/chirp-daily-20160717/chirp/drivers/alinco.py",
> line 138, in _download
>       data += self._download_chunk(addr)
>     File "/usr/local/bin/chirp-daily-20160717/chirp/drivers/alinco.py",
> line 116, in _download_chunk
>       raise errors.RadioError("No response from radio")
> RadioError: No response from radio
>
> ERROR: ----------------
> ERROR: Clone failed: No response from radio
> ERROR: --- Exception Dialog: No response from radio ---
> ERROR: None
>
> ERROR: ----------------------------
>
> root at compass:/usr/local/bin/chirp-daily-20160717#
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jack at k3fiv at arrl.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>