[chirp_users] UV5R2 7 watt

Chris Petry chrispetry1971 at gmail.com
Sun Feb 14 13:56:36 PST 2016


Ah,crap. I knew it was going to be something incredibly simple.

Thank you,
Chris
KM4PUR
On Feb 14, 2016 4:34 PM, "Jim Unroe" <rock.unroe at gmail.com> wrote:

> On Sun, Feb 14, 2016 at 4:24 PM, Chris Petry <chrispetry1971 at gmail.com>
> wrote:
> > Good evening all,
> >
> > Having some trouble using a UV5R with the software. It keeps saying I am
> > choosing the wrong model.  Forgive me if this has been gone over before,
> I
> > did not see it in my review of emails.
> >
> > Chris
> > KM4PUR
>
> Hi Chris,
>
> If you are selecting UV-5R then you are choosing the wrong model.
>
> BF-F8HP (in daily builds)
> Also includes the BF-A58
> Also includes the BF-F9V2+
> Also includes the GT-3TP
> Also includes the UV-5RTP
> Also includes the UV-5R7W  <-- this is your radio
>
> The above, cut-and-pasted from the "Supported Radio Models" list on
> the CHIRP home/wiki page, is intended to show that these UV-5R
> variants with 3 power levels all use the BF-F8HP model selection.
>
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Chris at chrispetry1971 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160214/45f3a288/attachment-0002.html 


More information about the chirp_users mailing list