[chirp_users] Chirp and Icom IC-7200

George Mulak gmulak at tierratek.com
Tue Feb 9 09:50:17 PST 2016


I too ran the update and it now works!  Awesome!

Thank you so much, it was so hard to program all thos channels by hand.

George Mulak

On 02/08/2016 05:46 PM, Bill wrote:
> Hi Marco
> I wanted to report back to you now that I have had a chance to try the
> chirp update. I am having no trouble with communication whether on Auto
> or 19200. Thank You again for fixing this issue. It make programming
> memories a lot easier.
> Bill
>
> On 1/20/2016 3:42 AM, IZ3GME Marco wrote:
>> Hi Bill
>> you probably noticed that I updated the issue, the updated driver for
>> 7200 should be included in next daily build.
>> Other then just fix it I also added support for per memory digital flag
>> and filter width, you'll find them in memory editor (right click on
>> memory, properties -> "Other" tab)
>>
>> During tests I had some communication problem with radio; to have a
>> stable communication I had to set on radio CI-V BAUD RATE to 19200, when
>> set to Auto it works inconsitently.
>> Once you'll get the new version please try setting Auto and let me know
>> if it works for you.
>>
>> 73 de IZ3GME Marco
>>
>> On 19/01/2016 00:24, Bill wrote:
>>> Bug issue reported Marco :)
>>>
>>> On 1/18/2016 11:42 AM, Marco IZ3GME wrote:
>>>> First bunch of test done, I have some detail:
>>>> - 7200 is (supposed to be) supported
>>>> - communication through usb cable is possible, no need for serial CIV
>>>> interface
>>>> - chirp can recognize 7200 during icom autodetect, this confirm it can
>>>> communicate with radio
>>>> - it does not get any answer from radio when requesting memories
>>>>
>>>> So,
>>>> yes sir we have a bug.
>>>>
>>>> I start debugging this now, please open a bug issue on chirp site in
>>>> this while so we can trace it.
>>>>
>>>> 73 de IZ3GME Marco
>>>>
>>>> On 18/01/2016 14:28, Bill wrote:
>>>>> So it doesn't matter what I do it's not gonna work? The website says it
>>>>> supports the IC-7200? I am banging my head on the wall over here lol :)
>>>>> Bill
>>>>>
>>>>> On 1/18/2016 7:19 AM, Ryan Tourge wrote:
>>>>>> It has been hit and miss for me. When it does work it loads all the
>>>>>> memories I have already stored as FM mode and I can't change it. I've been
>>>>>> meaning to fix it but haven't had a chance yet.
>>>>>>
>>>>>> On Mon, Jan 18, 2016 at 7:52 AM, Bill<billsspot at bellsouth.net>  wrote:
>>>>>>
>>>>>>> Ok got an answer to my question. Yes you can upload memories using USB.
>>>>>>> So the problem appears to be with Chirp? It will not read from the
>>>>>>> radio. Anyone with any experience using Chirp with an IC-7200? Trying to
>>>>>>> make this work.
>>>>>>> Thank You in advance for your help
>>>>>>> Bill
>>>>>>>
>>>>>>>
>>>>>>> On 1/18/2016 1:31 AM, Bill wrote:
>>>>>>>> Ok so I am wanting to use chirp to upload memories to my Icom IC-7200
>>>>>>>> Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My
>>>>>>>> understanding is that the USB should work, But I cannot seem to get it
>>>>>>>> to work.  I do not have a CIV cable. So does anyone have any experience
>>>>>>>> with the IC-7200? Can I use the USB connection to upload memories? Or am
>>>>>>>> I going to need a CIV cable?
>>>>>>>> Thanks Bill
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> chirp_users mailing list
>>>>>>>> chirp_users at intrepid.danplanet.com
>>>>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>>>> To unsubscribe, send an email to
>>>>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>>> _______________________________________________
>>>>>>> chirp_users mailing list
>>>>>>> chirp_users at intrepid.danplanet.com
>>>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>>> To unsubscribe, send an email to
>>>>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>>>
>>>>>> _______________________________________________
>>>>>> chirp_users mailing list
>>>>>> chirp_users at intrepid.danplanet.com
>>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>> To unsubscribe, send an email tochirp_users-unsubscribe at intrepid.danplanet.com
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to %(user_address)s
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>
>

-- 
George Mulak, Sales Manager
TierraTek, Inc.
PO Box 882
Cypress, CA 90630
Office:  (714) 252-4868 X503
Cell or Text:  (714) 585-5602
Personal fax:  (714) 731-4809
gmulak at tierratek.com
http://www.tierratek.com




More information about the chirp_users mailing list