[chirp_users] 20160209 Build Issue

[Walt Childson]

Marco,

Apparently nothing gets copied to the Clip board when I select all and Copy
(or even cut)



On Wed, Feb 10, 2016 at 8:32 AM, Walt Childson <wchildson at gmail.com> wrote:

> Marco,
>
> Sorry about not being specific.
>
> Steps were:
>
> 1. Open existing saved CSV
> 2. Created second tab
> 3. Started Chirp
> 4. Downloaded from radio
> 5. Clicked Special Channels
> 6. Cntl-A for select all (also repeated this step, with selective lines
> which did not include the numbered memories)
> 7. Cntl-C for copy
> 8. Move to A1 cell of second tab in CSV, and Cntl-V for paste
> 9. Error was Microsoft double beep indicator and nothing got pasted.
>
> My radio is on my boat, so it will be another hour before I'm there to try
> the 2/10/16 build. I will attempt to the paste (8) into a word or text
> document to see if it was an Excel issue (It was getting late, and I should
> have thought about that last night).
>
> Walt
>
> N6STM
>
> On Wed, Feb 10, 2016 at 2:32 AM, Marco Filippi IZ3GME <
> iz3gme.marco at gmail.com> wrote:
>
>> Hi Walt
>> please try to be more specific:
>> What happen (or not happen) exactly when you try to copy the Special
>> Memories?
>> What are the steps required to reproduce the problem?
>>
>> Also see if there's any error indication in debug.log and send it to me.
>> For instructions on how to get the log see
>>
>> http://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues#Getting-your-debug-log
>>
>> 73 de IZ3GME Marco
>>
>> On 10/02/2016 06:02, Walt Childson wrote:
>> > Well, I had some success. Even though the Prolific device did not show
>> > up under device manager, but I was able to down load and up load to the
>> > radio.
>> >
>> > BUT, with the 02/09/16 build, I was not able to copy the Special
>> > Memories. Sure would like to be able to do that and paste back.
>> >
>> > Walt
>> >
>> > On Tue, Feb 9, 2016 at 5:09 PM, Walt Childson <wchildson at gmail.com
>> > <mailto:wchildson at gmail.com>> wrote:
>> >
>> >     I've been playing around.
>> >
>> >     It appeared that the Prolific driver was not in my device manager.
>> >     So I attempting to do all sort of things. I uninstalled those other
>> >     programs (baefeng, HRD). I tried to execute the "fake driver" on the
>> >     miklor site (even though I believe I have a valid FTDI chip). I also
>> >     uninstalled Chip and installed 2/9/16 again. Every time I plug in my
>> >     cable, it does not find the driver in my drive, and when it uses
>> >     Microsoft, it creates a standard USB Serial driver.
>> >
>> >     When I drilled down into updating the driver, and changed the
>> >     highlight from FTDI to Prolific, my operating (Windows 7) crashed
>> >     and had to go into the automatic repairing of itself.
>> >
>> >     Any sort of brainstorming will help.
>> >
>> >     Thanks
>> >
>> >     Walt
>> >
>> >     N6STM
>> >
>> >     On Tue, Feb 9, 2016 at 11:51 AM, Dan Smith <dsmith at danplanet.com
>> >     <mailto:dsmith at danplanet.com>> wrote:
>> >
>> >         > 1. Is 3281 issue fixed in this build?
>> >
>> >         Yes, from the build announcement:
>> >
>> >          > [Marco Filippi <iz3gme.marco at gmail.com
>> >         <mailto:iz3gme.marco at gmail.com>>] [FT8x7] Allow pasting
>> memories
>> >         to special channels
>> >
>> >         > 2. What is my current issue with the inability to download?
>> >
>> >         Nothing changed in that driver, so it must be something
>> >         environmental.
>> >         Indeed, your debug log just indicates that it's a communication
>> >         issue.
>> >
>> >         I'll let the Windows experts here comment on things to check for
>> >         and try
>> >         (drivers, rebooting, etc).
>> >
>> >         --Dan
>> >         _______________________________________________
>> >         chirp_users mailing list
>> >         chirp_users at intrepid.danplanet.com
>> >         <mailto:chirp_users at intrepid.danplanet.com>
>> >         http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> >         This message was sent to Walt Childson at wchildson at gmail.com
>> >         <mailto:wchildson at gmail.com>
>> >         To unsubscribe, send an email to
>> >         chirp_users-unsubscribe at intrepid.danplanet.com
>> >         <mailto:chirp_users-unsubscribe at intrepid.danplanet.com>
>> >
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > chirp_users mailing list
>> > chirp_users at intrepid.danplanet.com
>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> > This message was sent to Marco Filippi at iz3gme.marco at gmail.com
>> > To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> >
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to Walt Childson at wchildson at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160210/a02f9e19/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: debug.log
Type: application/octet-stream
Size: 29385 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160210/a02f9e19/attachment.obj