[chirp_users] programming cable problems

John LaMartina JohnLa at usa.net
Wed Dec 28 21:32:57 PST 2016

Refer to FAQ items 1 and 2 at
These are the two most common causes of cable failure.
I hope this assists.




From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Dave
Sent: Wednesday, December 28, 2016 1:52 PM
To: chirp_users at intrepid.danplanet.com; chirp_users-request at intrepid.danplanet.com
Subject: [chirp_users] programming cable problems


I use the latest version of Chirp downloaded about 10 days ago. It worked 
well and did all the programming I need for the Beofeng uv5r, (different 
cable) Btech UV 2501-220. I had a small computer problem and after 
correcting the computer problem I could program the Btech UV 2501 but the 
programming cables for the UV5R have a problem. The one that I used over and 
over now puts my UV5R in a transmit as soon as i plug it into the computer. 
The other cable gives me an error message that says the Commport (1-8 ) wont 
What do I do.
Thanks for any ideas

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161229/8cb06926/attachment-0002.html 

More information about the chirp_users mailing list