[chirp_users] programming cable problems

Jardy jardy72 at yahoo.com
Wed Dec 28 20:56:46 PST 2016


2 things. 1) roll your cable driver back to 3.2.0.0. 2). Push the cable FIRMLY into the radio. 

Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator. 


> On Dec 28, 2016, at 10:52, Dave <DWB2808 at centurytel.net> wrote:
> 
> I use the latest version of Chirp downloaded about 10 days ago. It worked 
> well and did all the programming I need for the Beofeng uv5r, (different 
> cable) Btech UV 2501-220. I had a small computer problem and after 
> correcting the computer problem I could program the Btech UV 2501 but the 
> programming cables for the UV5R have a problem. The one that I used over and 
> over now puts my UV5R in a transmit as soon as i plug it into the computer. 
> The other cable gives me an error message that says the Commport (1-8 ) wont 
> work.
> What do I do.
> Thanks for any ideas
> Dave
> KD0TUN
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Jardy at jardy72 at yahoo.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161228/cb51fb75/attachment-0002.html 


More information about the chirp_users mailing list