[chirp_users] Wouxun KG UV8D deaf

Andrew ziltro at ziltro.com
Sat Dec 3 05:25:04 PST 2016


On 03/12/16 10:22, Caglar AKGUNGOR wrote:
> I have seen on the net that other people had similar problems, their 
> radios becoming deaf after programming.
>
> Does anyone know what is the cause? And the cure?
>

I've heard of a similar problem which was caused by physical damage to 
the headphone socket. It wasn't programming which caused the problem, it 
was plugging the programming cable in which caused it. The audio goes 
through the headphone jack socket so the internal speaker can be muted 
when a plug is inserted. If the contact hasn't sprung back properly then 
the internal speaker will stay muted.
Does the RX light turn on when it receives a signal?

You could try plugging a speaker/headphones into the socket and see if 
you hear the audio through that. Although I believe it's a 2.5mm jack 
plug you'll need!

-- 

Andrew.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20161203/f3fb3735/attachment-0002.html 


More information about the chirp_users mailing list