[chirp_users] Thanks

[Jardy Dawson]

If you have more than one device using comm ports and aren't sure which one is your cable, while in Device Manager, unplug your cable.  Device Manager will reset and will remove your cable from the list.  When you plug it back in, it will reset again and show your cable once more.  ALWAYS plug into the same USB port, otherwise Windows will 'update' your driver and possibly make your cable not work again until you roll back the driver to 3.2..0

Jardy Dawson
WA7JRD Ham Radio

Message relayed through The Senior Boston Relay Race baton pass.

On Aug 31, 2016, at 05:03, Jim Unroe <rock.unroe at gmail.com> wrote:

> On Wed, Aug 31, 2016 at 7:50 AM, lasomrak <lasomrak at bellsouth.net> wrote:
> I don't find the word "port"when I go to device manager, using windows 7.
> KK4RC.
> 

It should look something like this.

Jim KC9HI
<port.jpg>
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72 at yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160831/5b388834/attachment.html