[chirp_users] Baofeng data to Yaesu

[Peter J. McClosky]

Coping and then pasting is a much safer way to get information on to a Baofeng.  

If you just upload file from another radio you stand a good chance of “semi bricking" the the uploaded radio.  (I say “semi bricking”, because you can get the radio back working, but it has taken me a few hours with each radio.)

(I have programed over 120 radios for club members, and other, and have never had a problem by coping and then pasting.
Peter
-----
Peter J. McClosky, N7IY
Eugene, Oregon
pmcclosky at earthlink.net
n7iy at arrl.net
http://home.earthlink.net/~pmcclosky/

> On Aug 10, 2016, at 1:05 PM, Jim Unroe <rock.unroe at gmail.com> wrote:
> 
> On Wed, Aug 10, 2016 at 1:56 PM, awake <awake at 0324am.net> wrote:
>> You can have multiple radios connected at the same time, they'll be just in
>> separate tabs. I'd suggest to load each radio in a separate tab and then
>> copy and paste the relevant data between them. Direct export won't work
>> because you're most likely trying to transfer also some model-specific
>> settings.
>> 
>> Cheers,
>> rad0
>> 
> 
> Copy and paste between tabs is certainly works and is convenient, but
> importing the *.img radio into a tab for the destination radio is more
> thorough.
> 
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Peter at pmcclosky at earthlink.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160810/4cd77411/attachment.html