[chirp_users] Leixen VV-898

[n2zou at aol.com]

I had the same problem. I think you have to upload the the software each time and then up load your radio to recognize it. Then you can program your radio. I had to do that with the Leixen software. Hope this helps.


Mike



-----Original Message-----
From: Marc Fuller <marc at Theriverparrett.com>
To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
Sent: Thu, Apr 28, 2016 4:19 am
Subject: Re: [chirp_users] Leixen VV-898



Forgot to mention. When I start the download, the radio switches and shows “waiting” but then I get the error.
 
Thanks
 
Marc
 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com]On Behalf Of Marc Fuller
Sent: 28 April 2016 09:05
To: chirp_users at intrepid.danplanet.com
Subject: [chirp_users] Leixen VV-898

 
Hi All,
 
I’m having a problem with two Leixen VV-898’s. One is version 1.03 and one is v1.04. The v1.03 was programmed by me about 4 months ago and worked perfectly.
 
A friend purchased a new one for his truck and asked me to program it. But I’m getting an error when I try to read the radio. I am getting “Failed to download from radio: Radio refused program mode”.
 
So, I then tried my one that I was able to program 4 months ago, and I get the same error.
 
I am using todays chirp build.. same programming cable (and the cable driver is fine).
 
Any help appreciated
 
Marc
 
 

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Michael Caso at n2zou at aol.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160428/3b20c57d/attachment.html