[chirp_users] BaoFeng UV-82C and CHIRP power question
Ryan Tourge
Sun Apr 24 08:54:50 PDT 2016
Irrelevant post. It's already been established that the power limits are
set in the radio not the programming software. Besides... if they didn't
want to be "complicit in promoting criminal activity" the software wouldn't
let you program those frequencies.
On Sun, Apr 24, 2016 at 11:47 AM, John W. <jl_wilkerson at att.net> wrote:
> Illegal for use on MURS or FRS. I doubt the developers of Chirp want to be
> complicit in promoting criminal activity.
>
>
> ------------------------------
> *From:* Dan Jolley via chirp_users <chirp_users at intrepid.danplanet.com>
> *To:* "chirp_users at intrepid.danplanet.com" <
> chirp_users at intrepid.danplanet.com>
> *Sent:* Sunday, April 24, 2016 8:28 AM
> *Subject:* [chirp_users] BaoFeng UV-82C and CHIRP power question
>
> I have a UV-82C and I can only select either 1Watt or 5Watt output using
> CHIRP or the factory programming software.
>
> Is there some way using CHIRP (or other means) to select 2Watts for MURS
> or 500mW for FRS frequencies 8 through 14?
>
> I'm pretty sure the answer will be "no" because I know the power output
> selection is embedded in the firmware in the radio.
>
> Is there an antenna that will reduce the power output without damaging the
> radio?
>
> Thank you for any information on this subject,
> Dan
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to KD8DVR at jl_wilkerson at att.net
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ryan Tourge at ryan.tourge at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160424/b61f98e4/attachment.html
More information about the chirp_users
mailing list