[chirp_users] How to program null channels

[B Stone]

Dear fellow Chirp'ers:

I am trying to program in a few channels while leaving some channels 
blank. I was able to do this with a version of Chirp from 2014 but I 
recently tried to upload my old .img to a new UV-82 and was met with a 
firmware incompatibility message. In my new .img I set the channels I 
want to use (0, 3, and 4) and want the rest of the channels to be 
completely unavailable (if you are on channel 0 and press the up arrow 
then you immediately go to 2 having skipped 1). I thought the way to do 
this was to was to set the frequency to 0.000000 but I get an error 
message about being out of reference. I also tried to use a CSV file to 
import and saw just the few channels I need but this didn't result in 
the radio only having those three channels. I am including a screenshot 
of my old .img in hopes this can be guiding.

I thank you for your time and assistance.

Sincerely,

B Stone
-------------- next part --------------
A non-text attachment was scrubbed...
Name: UV82.png
Type: image/png
Size: 38787 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150916/52d1d66f/attachment.png