[chirp_users] Yaesu VX6 won't communicate with Chirp

[mats.g.roos at gmail.com]

Try this:

1. in terminal: sudo nvram boot-args="kext-dev-mode=1”
2. reboot
3. install driver from: http://1drv.ms/Nl68Ru
4. try your cable.

Mats


> On Sep 3, 2015, at 12:00, Robert Zamalin <bzamalin at gmail.com> wrote:
> 
> Good Morning All:
> 
> I am using a Yaesu VX6,   iMac 21.5 and OS X Yosemite 10.10.5. and a cable from KawaMall.
> 
>  When I am attempting to download the contents from the my Yaesu VX6 into CHIRP while in the clone function ,I get an error message saying “an error has occurred” failed to communicate with the radio-no response from radio.
> 
> What further steps should I take to correct this.
> 
> Thanks for your time
> 
> 73
> Bob Zamalin, WA6VIP
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150903/9e7cc58c/attachment.html