[chirp_users] Jetstream 270M

Jim Unroe rock.unroe at gmail.com
Wed Oct 14 09:21:35 PDT 2015


On Wed, Oct 14, 2015 at 11:22 AM, Eric Evans <km4jvv at gmail.com> wrote:
>
> I've never used CHIRP and I am very confused. I just purchased a JT270M and
> can read from radio to CHIRP, but not write CHIRP to the radio. Jetstream
> advised me that CHIRP and the 270M will not work with WIN 10. I will not get
> into the quality of support from them in this section.
>
> I do have a machine with WIN7 on it and I get the same issue. I did get the
> VV898 software to load the 270 M ( 1 test freq)but with errors (No ALPHA
> Tag). Jetstream suggested a different prolific driver, but as of yet,
> nothing has been offered to me from them to use. I am fair with computers,
> and I wish to determine the following:
>
> 1) Which OS to use
>
> 2) Which driver do I use for the prolific driver (USB w/chipset)
>
> 3) Any other suggestions that you may have.
>
> Thank you!
>
> --
> EJ Evans
> KM4JVV
>


Generally if you are running any version of windows from Vista and up
any you have a programming cable with a Prolific type chip, you must
download, install and select the older Prolific v3.2.0.0 driver.

http://www.miklor.com/COM/UV_Drivers.php

Jim KC9HI



More information about the chirp_users mailing list