[chirp_users] CHIRP with Linux Mint / Linux Zorin

Nigel Johnson, MIEEE nw.johnson at ieee.org
Thu Oct 1 17:14:10 PDT 2015

Hash: SHA1

I teach a class using GSM modems with a built-in USB connector that has a serial device emulator.  The original batch I bought comes up as /dev/ttyUSB0.  This year, due to increased class sizes, we bought some more,  They are using a new TI Chip for the USB-serial bridge, and this comes up as /dev/ttyACM0.

Look out for it in case that is what you have.  I am using SuSE linux 13.2


On 01/10/15 18:25, Jim Unroe wrote:
> On Thu, Oct 1, 2015 at 4:21 PM, Richard AG5M via chirp_users
> <chirp_users at intrepid.danplanet.com> wrote:
>> I am new to Linux (Linux Mint 17.2 and Zorin 9.0).  I have installed CHIRP on both computers.  But I am unable to download from my Baofeng UV-3R or Baofeng UV-5R.  In each case it appears it does not find, or allow me access to, the Com Port ttyS0, or any port for that matter.  Probably something simple I do not know about being new to Linux.  Can anyone please give me some advice?  Thanks
>> Richard AG5M
> Richard,
> I am using Linux Mint 17.2 on one of my computers. The "Com Port" of
> my USB programming cable is "/dev/ttyUSB0" and I had to scroll all the
> way down to the bottom of the list to find it.
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com


- -- 
Nigel Johnson

Amateur Radio, the origin of the open-source concept!


You can reach me by voice on Skype:  TILBURY2591

If time travel ever will be possible, it already is. Ask me again yesterday

This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way.
   Nigel Johnson <nw.johnson at ieee.org>

Please consider the environment when deciding if you really need to print this message

Version: GnuPG v2


More information about the chirp_users mailing list