[chirp_users] 9000D

James Jalbert kc1ecv at gmail.com
Thu Nov 12 19:00:26 PST 2015


Yes it is on the list, when I did the initial read of the radio, it picks
up as tyt th 9000 144, which is all right, but it did say it was a beta
driver, so I wondered it that was why. I have played, and I have found that
I can import with chirp, than use the tyt software to read the radio,
disable tx on the channels from that software, than upload it from there.
Only issue being if I do that, everytime I use chirp to add new channels, I
need to go through that process, just was I'm hopes there would be a way
through chirp, like one stop shopping. I think your suggestion is easier.
Thanks for the input.

James Jalbert
KC1ECV
On Nov 12, 2015 9:54 PM, "Gary Runningbear" <runningbear2000 at gmail.com>
wrote:

> Is your radio on chirp list of compatible equipment? I am thinking maybe
> it is not in which case you will just have to be careful not to use the
> microphone while monitoring a public service channel. In days of old when
> Michigan was on normal repeater operation for public service I had the
> frequencies, tones, offset and all that programmed for our central
> dispatch. the theory was that in a dire Emergency most of the rules go out
> the window and I have no hesitation of picking up the mic and talking
> direct to central dispatch. However in these days of all trunking systems
> for public service I don't have to worry about that but I still have fire
> and EMS services program in and I can talk on those channels in an
> emergency. As long as you are aware that you are on a public service
> channel you won't be grabbing the mic. shouldn't be a problem.
> On Nov 12, 2015 9:37 PM, "James Jalbert" <kc1ecv at gmail.com> wrote:
>
>> Not sure what happens on the radio, what I have tried is to set the
>> offset to off and those frequencies will not import to chirp, I see them
>> when I import, but they are grayed out and con not be selected. I also
>> tried to set off set to split, and the offset frequency to an out of range,
>> as well as tried setting offset to + or - and the offset freq to something
>> like 1000 and I get the same result, can not import the frequencies from
>> the csv to chirp
>>
>> James Jalbert
>> KC1ECV
>> On Nov 12, 2015 8:14 PM, "Eric Vought" <evought at pobox.com> wrote:
>>
>>> What happens with this particular radio if you set the transmit
>>> frequency to an out-of-range value? 0, -1, 0.1 Mhz, whatever, something
>>> that the radio will refuse to transmit on?
>>>
>>> On Thu, Nov 12, 2015 at 6:39 PM, James Jalbert <kc1ecv at gmail.com> wrote:
>>>
>>>> No big, no miss leading, different radios treat things different
>>>>
>>>> James Jalbert
>>>> KC1ECV
>>>> On Nov 12, 2015 7:30 PM, "Gary Runningbear" <runningbear2000 at gmail.com>
>>>> wrote:
>>>>
>>>>> To James KC1ECV,
>>>>>   You were right my friend about turning duplex to off to kill the
>>>>> transmit. I guess that particular radio can't be affected by that so now I
>>>>> guess you'll have to set a switch in your own mind do not grab the mic
>>>>> while monitoring those PS channels. Sorry to have misled you but that was a
>>>>> learning point for me and it won't happen again. hi hi
>>>>>
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> To unsubscribe, send an email to
>>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>
>>>>
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151112/06203b3a/attachment-0002.html 


More information about the chirp_users mailing list