[chirp_users] 9000D

[Gary Runningbear]

The pleasure is all mine, my friend. Happy Hamming!
On Nov 12, 2015 10:01 PM, "James Jalbert" <kc1ecv at gmail.com> wrote:

> Yes it is on the list, when I did the initial read of the radio, it picks
> up as tyt th 9000 144, which is all right, but it did say it was a beta
> driver, so I wondered it that was why. I have played, and I have found that
> I can import with chirp, than use the tyt software to read the radio,
> disable tx on the channels from that software, than upload it from there.
> Only issue being if I do that, everytime I use chirp to add new channels, I
> need to go through that process, just was I'm hopes there would be a way
> through chirp, like one stop shopping. I think your suggestion is easier.
> Thanks for the input.
>
> James Jalbert
> KC1ECV
> On Nov 12, 2015 9:54 PM, "Gary Runningbear" <runningbear2000 at gmail.com>
> wrote:
>
>> Is your radio on chirp list of compatible equipment? I am thinking maybe
>> it is not in which case you will just have to be careful not to use the
>> microphone while monitoring a public service channel. In days of old when
>> Michigan was on normal repeater operation for public service I had the
>> frequencies, tones, offset and all that programmed for our central
>> dispatch. the theory was that in a dire Emergency most of the rules go out
>> the window and I have no hesitation of picking up the mic and talking
>> direct to central dispatch. However in these days of all trunking systems
>> for public service I don't have to worry about that but I still have fire
>> and EMS services program in and I can talk on those channels in an
>> emergency. As long as you are aware that you are on a public service
>> channel you won't be grabbing the mic. shouldn't be a problem.
>> On Nov 12, 2015 9:37 PM, "James Jalbert" <kc1ecv at gmail.com> wrote:
>>
>>> Not sure what happens on the radio, what I have tried is to set the
>>> offset to off and those frequencies will not import to chirp, I see them
>>> when I import, but they are grayed out and con not be selected. I also
>>> tried to set off set to split, and the offset frequency to an out of range,
>>> as well as tried setting offset to + or - and the offset freq to something
>>> like 1000 and I get the same result, can not import the frequencies from
>>> the csv to chirp
>>>
>>> James Jalbert
>>> KC1ECV
>>> On Nov 12, 2015 8:14 PM, "Eric Vought" <evought at pobox.com> wrote:
>>>
>>>> What happens with this particular radio if you set the transmit
>>>> frequency to an out-of-range value? 0, -1, 0.1 Mhz, whatever, something
>>>> that the radio will refuse to transmit on?
>>>>
>>>> On Thu, Nov 12, 2015 at 6:39 PM, James Jalbert <kc1ecv at gmail.com>
>>>> wrote:
>>>>
>>>>> No big, no miss leading, different radios treat things different
>>>>>
>>>>> James Jalbert
>>>>> KC1ECV
>>>>> On Nov 12, 2015 7:30 PM, "Gary Runningbear" <runningbear2000 at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> To James KC1ECV,
>>>>>>   You were right my friend about turning duplex to off to kill the
>>>>>> transmit. I guess that particular radio can't be affected by that so now I
>>>>>> guess you'll have to set a switch in your own mind do not grab the mic
>>>>>> while monitoring those PS channels. Sorry to have misled you but that was a
>>>>>> learning point for me and it won't happen again. hi hi
>>>>>>
>>>>>> _______________________________________________
>>>>>> chirp_users mailing list
>>>>>> chirp_users at intrepid.danplanet.com
>>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>>> To unsubscribe, send an email to
>>>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> chirp_users mailing list
>>>>> chirp_users at intrepid.danplanet.com
>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>>> To unsubscribe, send an email to
>>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>>
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151112/de6e308f/attachment.html