[chirp_users] error Programming FT897

[Dave Nathanson]

Hi Don,
Does the radio display indicate "Clone mode"? 
It ought to after you power it on holding down the < > buttons. This picture is of my FT857D in clone mode, but it is pretty much the same as your FT897.

Alternately, your usb/serial cable might need a different software driver than the other cables do. Driver problems are common. Way too common! Can you tell if this USB/serial cable is working? 

73,
Dave Nathanson
KG6ZJO




On Nov 10, 2015, at 8:34 AM, Don Weber <831forsale at gmail.com> wrote

so, I am in clone mode
cable plugged in
menu is set to CAT
press the <> buttons while power on
click OK on Chirp
press the snd (C) button on ft897
it sits there for a bit, then gets error, 
eventually Chirp times out with error


On Nov 9, 2015, at 2:53 PM, Dave Nathanson <k6gzjo.lists.chirpusers at nathanson.org> wrote:

Hi Don,
The Yaesu radios require being in the correct "Clone" mode before they will accept data transfer. You'll need to power up the radio while holding down another button. Are you doing that? Does the radio say something about "Clone" on the display? 
CHIRP usually pops up a helpful message with the details just before the clone operation begins. But people often dismiss all dialog boxes without reading them, or they click the box to never tell me this again. ANyway, that's probably the direction to look in. 

73,
Dave Nathanson
KG6ZJO


On Nov 9, 2015, at 10:25 AM, Don Weber <831forsale at gmail.com> wrote:

Trying to program FT897
running win8, the prolific driver is good, I can use my other cables to program baofeng radios fine. the cable for the 897 when plugged in results in no errors, I have the latest Chirp daily build installed.
when trying to download from the radio, it does not communicate at all.
I set the baud rate on both the radio and the com port to make sure they are the same
no luck, any other ideas for things i can try?

thanks






-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151110/4da03955/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Yaesu 857D clone mode.jpeg
Type: image/jpg
Size: 50942 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20151110/4da03955/attachment.jpg