[chirp_users] New Daily Build

[Build System]

Greetings,

A new daily build of CHIRP is available.  This includes changes made
directly to the tree yesterday, and may include additional features,
bug fixes, and/or bugs.  If you are interested in trying it, grab it
from the following location:

  http://trac.chirp.danplanet.com/chirp_daily/daily-20150502


A list of the changes included in this build (since the last daily)
follows:

Changes for Build #348
[Tyler Tidman <tyler.tidman at draak.ca>] Add French VHF Marine channel stock config.  Fixes #1809.

[Jim Unroe <rock.unroe at gmail.com>] [UV-B5] Remove local "validate_memory" helper

Remove the local "validate_memory" helper and the 70 MHz maximum
split limit that it imposes.

Related to #2559

[Marco Filippi <iz3gme.marco at gmail.com>] Add tx freq check

Add TX frequency check to common memory validation routine to ensure it always
fall withing radio supported ranges, including when split is set
Also fix bruteforce test which was using a too low RX freq with - split

Implement #2557

[Jim Unroe <rock.unroe at gmail.com>] [BF-F8HP] Add Support for New Firmware String

Add detection for F5R3407 firmware.

related to #2551

[Richard Cochran <ag6qr at sonic.net>] [ft2900] Fix checksum calc for Euro version of FT-2900/FT-1900 (#2501)
This patch fixes the checksum calculation for the European versions
of the FT-2900/FT-1900 radio.  The US and Euro versions have different
IDBLOCK strings.  It turns out that the radio's checksum algorithm
includes the IDBLOCK data as it calculates the checksum, but the
original CHIRP ft2900 driver code hadn't taken this into account.
The differences in the IDBLOCK strings were causing checksum
mismatch.

[Jim Unroe <rock.unroe at gmail.com>] [termn8r] Add Anytone TERMN-8R Support #2437

Add most "Function Setup" settings that are common to
the OBLTR-8R and TERMN-8R radios.

related to #2437

[Chris Fosnight <chris.fosnight at gmail.com>] [ft60] Corrects minor typos in UI. Fixes #2535

Changes "CTCSS/DSC/DTMF Settings" to "CTCSS/DCS/DTMF Settings".
Changes Miscellaneous Settings "Bush Channel Lock-Out" to
"Busy Channel Lock-Out".

#2535