[chirp_users] BF-F8HP

Larry Booth lobooth at verizon.net
Tue Mar 10 15:02:21 PDT 2015


Yes. I did actually remove and install it several times when trying to diagnose the problem. On the last try I downloaded the radio image again to CHIRP and then uploaded it to the radio then unplugged the cable and it worked. Too many steps in the mix to determine what worked. 

Sent from my iPhone
Larry O. Booth
        Artist

> On Mar 10, 2015, at 5:29 PM, thecanesvenatici <thecanesvenatici at gmail.com> wrote:
> 
> You did remove the data cable from the radio. Something I've done when hurried to test it, not remove the cable.
> 
> 
> Sent from my T-Mobile 4G LTE Device
> 
> 
> -------- Original message --------
> From: Larry Booth <lobooth at verizon.net> 
> Date:03/10/2015 12:18 PM (GMT-05:00) 
> To: chirp_users at intrepid.danplanet.com 
> Cc: 
> Subject: [chirp_users] BF-F8HP 
> 
> After uploading my first template to my new BF-F8HP all of the memory channels are correct.  CHIRP seems to have operated as expected.  But there is no audio now on the radio.  Not even squelch.  It doesn’t look like any setting would have disabled the audio.  What could have caused this?
> 
>  
> 
> Larry O. Booth
> 
>          
> 
>  
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150310/fcdb8fd5/attachment-0002.html 


More information about the chirp_users mailing list