[chirp_users] error message on upload.

Jim Unroe rock.unroe at gmail.com
Tue Mar 10 02:12:27 PDT 2015


Jim,

You get this error when you try to upload an incompatible image to a
Baofeng UV-5R variant (including the BF-F8HP and the UV-82). You must
not upload a CHIRP Radio Image (*.img) file that was saved from a
radio with BFB firmware into a radio with N5R firmware. The opposite
is also true.

You must download from your radio (or load a saved .img file that came
from your radio) into CHIRP creating a tab from your radio. Then my
preference would be to import the groups programming file into this
tab.

A popular alternative would be to also load the groups programming
file into CHIRP creating a second tab. Then you would copy-and-past
the channels from the groups tab to the tab for your radio.

When done, you would upload the tab for your radio into your radio.
Don't forget to save the changes to a file to be used later.

Jim KC9HI

On Tue, Mar 10, 2015 at 12:03 AM, Jim <jsites9297 at att.net> wrote:
> I have a Baofeng BF-F8HP. I have tried to program it with Chirp.It will
> download from the radio if I select UV-5.but when I try to upload the new
> programming it tells me-"Error=unsupported firmware N5R323F8HP-1" or
> something to that effect.I downloaded the radio program from the radio
> first,then copied my groups programming file onto that and tried to
> upload,only to get that message.I have done this successfully on other
> radios.any help appreciated.
> Thank you.
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com



More information about the chirp_users mailing list