[chirp_users] Downloading to Baofung BF-F9

Jim Unroe rock.unroe at gmail.com
Mon Mar 9 16:57:40 PDT 2015


On Mon, Mar 9, 2015 at 7:41 PM, Steve Lugar <cyclerider59 at gmail.com> wrote:
> I was able to download the driver for my cable finally, downloaded Chirp to my Dell running Win 7 and was able to upload from my
> BF-F9 using the BF5 selection. I add all my data for download to the radio but keep receiving an error message stating that there is unsupported firmware incompatible. Could you please provide  a fix for me, thanks for your time….
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

Also, are you trying to upload the same data file that you downloaded
from the radio, or are you try to upload a file that came from a
different radio? The error you are getting is the one you would get
when you try to upload a CHIRP Radio Image (*.img) file that was save
from a radio with BFB firmware into a radio with N5R firmware. If that
is the case, you must not do that and that it why CHIRP is preventing
it.

Instead, you can download from your radio into CHIRP and then use File
-> Import -> change the file mask to "CHIRP Radio Images (*.img)" and
then find and import the "master" .img file that you are trying to put
into your radio. An alternate to that would be to load the "master"
file into a second tab allow you to copy-and-paste the channels
between the tabs.

Jim KC9HI



More information about the chirp_users mailing list