[chirp_users] Puxing PX-888k supported?

Savage Possum
Sun Mar 29 05:45:54 PDT 2015

Is the above radio supported by proxy under some other branding or designation (ie like the H-777 supports BF-888)?

Sent from my iPossum
The Savage Possum

> On Mar 28, 2015, at 21:26, Jim Unroe <rock.unroe at gmail.com> wrote:
>> On Sat, Mar 28, 2015 at 9:36 PM, kcrunchone hill <kcrunchone at gmail.com> wrote:
>> Crazy thing I am not only getting an error message stating that some of the
>> features or functions may not work but the radio will not receive from one
>> another no matter what.
>> Prior to this several radios were programmed and with no problems now the
>> newer radios are not accepting programming, what can I do to over come this
>> issue? I would really like to be able to program them the same as prior
>> radios. Only the new radios are having a problem not the older UV5's
>> Rick_KRX1
> Sounds like you've uploaded a CHIRP Radio Image file saved from a
> radio with BFB firmware into a radio with N5R firmware. That is a
> no-no. The reverse is also true. The memory layout was changed with
> the introduction of N5R firmware making one radios image file
> incompatible with the other.
> You must not be using the latest daily build. The latest daily build
> verifies that the image being uploaded is compatible before uploading
> it. The upload is aborted if it isn't compatible the the target radio.
> Daily builds prior to September 2014 and the year old (next month)
> CHIRP v0.4.x stable build do not have this protection and because of
> this are not recommended for use with Baofeng radios.
> Before upgrading you will have to upload the original back up image
> file that was saved before the incompatible image was loaded to the
> radio. If one wasn't made (for some reason they usually aren't) then
> you will be able to get one and instructions for recovery on the
> miklor.com website.
> http://www.miklor.com/uv5r/UV5R-Recovery.php#N5R
> Jim KC9HI
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com

More information about the chirp_users mailing list