[chirp_users] Two Baofeng UV-5R radios but only one works with CHIRP

kd9ebr at gmail.com kd9ebr at gmail.com
Tue Jun 23 10:46:05 PDT 2015


They are different, I ran into the same problem with one of my technicians radios. Upload the problem radio to your computer,  it will create a new file. With your other configuration open, select all your channels and paste into the other configuration. Then download to the radio. 

Sent from my android device.

-----Original Message-----
From: Jay Planalp <jay at planalpmanagement.com>
To: chirp_users at intrepid.danplanet.com
Sent: Tue, 23 Jun 2015 12:39
Subject: [chirp_users] Two Baofeng UV-5R radios but only one works with CHIRP

Hello - I am a new CHIRP user and have two Baofeng UV-5R radios.  I was 
able to get CHIRP to communicate with one radio and uploaded some memory 
channels.  However, when I tried the second radio, I got an error 
message  "The upload was stopped because the firmware of the image (Ver 
BFB297) does not match that of the radio (BFB299 BFB297).  However, when 
I power on the radios holding the 3 key down, I see that the firmware 
version of both is the same - BFB297.  How do I resolve this???  
Thanks.  Jay
-- 
-----------------------------------------------
Jay C. Planalp
Planalp Management Consulting
www.planalpmanagement.com <http://www.planalpmanagement.com>
-----------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150623/96d5d194/attachment-0002.html 


More information about the chirp_users mailing list