[chirp_users] UV5R, HN5RV01 no RX audio

Bill Kasper williamkasper at frontiernet.net
Fri Jun 5 19:35:55 PDT 2015


The HN5RV01 also has a 150126N identifier
No change, Thanks for the test, Tried
on 146.52, TX audio still good as received on another
radio, no POST audio nor RX on the HN5R unit :-(

tnx Bill WB2SXY

On 6/5/2015 10:10 PM, Jim Unroe wrote:
> Hi Bill,
> For the fun of it, try this and report back.
> Jim KC9HI
>
> On Fri, Jun 5, 2015 at 9:52 PM, Bill Kasper
> <williamkasper at frontiernet.net>  wrote:
>> Hi Jim et al,
>>
>> Thanks for the info, I sent more info,
>> In the meantime, if someone has a known
>> good HN5RV01 image could you please send
>> it to me --
>>
>> tnx es 73 de Bill WB2SXY
>>
>> --
>>
>> On 6/5/2015 6:22 PM, Jim Unroe wrote:
>>> On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper
>>> <williamkasper at frontiernet.net>   wrote:
>>>> Hi list,
>>>>
>>>> Just finished programming a batch of
>>>> UV5R N5R2045 and -1 -7
>>>> All working fine.
>>>
>>> I assume that you mean N5R2401, N5R2405 and N5R2407.
>>>
>>>>
>>>> Using Chirp Daily 20150513:
>>>> download UV5R radio image
>>>> deleted existing frequencies
>>>> imported same freq list used on above batch
>>>> no errors at all reported
>>>> all seemed OK with import and upload
>>>
>>> OK
>>>
>>>>
>>>> Unit transmits ok, RX indicator blue background lite
>>>> works ok, when there is carrier or when hitting the
>>>> monitor switch, just no audio.  Tried set of headphones
>>>> in rec jack -- still no audio.
>>>
>>> You said all working fine above. "Unit"? Which unit? All of them? I'm confused?
>>>
>>>>
>>>> Tried the same with Daily 20150530, no errors,
>>>> no change.
>>>>
>>>> did keyboard reset, no errors, no change.
>>>>
>>>> Any possible setting that could cause this,
>>>> or DOA audio output?
>>>>
>>>> tnx es 73 de Bill WB2SXY
>>>> --
>>>
>>> I has someone send me a "factory" image from a radio with N5R firmware
>>> within the last couple of days that appeared to have been cross-loaded
>>> with BFB firmware at the factory. That would cause a radio not to
>>> receive.
>>>
>>> How about attaching your original downloaded image files?
>>>
>>> Jim KC9HI
>>> _______________________________________________
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
>>
>>
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com



More information about the chirp_users mailing list