[chirp_users] UV5R, HN5RV01 no RX audio, more info

Bill Kasper williamkasper at frontiernet.net
Fri Jun 5 16:59:17 PDT 2015


Hi list,

Using Chirp Daily 20150513:

Just finished programming a batch of
Baofeng UV5R N5R2401, N5R2405 and N5R2407.
All of these units working fine.

Also using Chirp Daily 20150513:
download UV5R radio image from HN5RV01
deleted existing frequencies
imported same .csv freq list used on above batch
no errors at all reported
all seemed OK with import and upload

HN5RV01 Unit transmits ok; transmitted audio ok,
RX indicator blue background light works ok when
there is carrier received or when hitting the
monitor switch, just no receive audio.  Tried set
of headphones in rec jack -- still no audio.
No "Channel Mode" voice with power-on-self-test,
either.

Tried the same with Daily 20150530, no errors,
no problems indicated; no change - no rx audio.

did keyboard (menu/40) reset, then did reload with
Daily 20150530, no errors, no problems indicated;
no change - still no rx audio.

Attached image is from this Daily 20150530 .

Any possible settings that could cause this,
or DOA audio output?

tnx es 73 de Bill WB2SXY
--
-------------- next part --------------
A non-text attachment was scrubbed...
Name: HN5RV01_1FB297.img
Type: application/octet-stream
Size: 6472 bytes
Desc: not available
Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150605/6144cfc0/attachment-0002.img 


More information about the chirp_users mailing list