[chirp_users] UV5R, HN5RV01 no RX audio

[Bill Kasper]

Hi Jim et al,

Thanks for the info, I sent more info,
In the meantime, if someone has a known
good HN5RV01 image could you please send
it to me --

tnx es 73 de Bill WB2SXY

--

On 6/5/2015 6:22 PM, Jim Unroe wrote:
> On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper
> <williamkasper at frontiernet.net>  wrote:
>> Hi list,
>>
>> Just finished programming a batch of
>> UV5R N5R2045 and -1 -7
>> All working fine.
>
> I assume that you mean N5R2401, N5R2405 and N5R2407.
>
>>
>> Using Chirp Daily 20150513:
>> download UV5R radio image
>> deleted existing frequencies
>> imported same freq list used on above batch
>> no errors at all reported
>> all seemed OK with import and upload
>
> OK
>
>>
>> Unit transmits ok, RX indicator blue background lite
>> works ok, when there is carrier or when hitting the
>> monitor switch, just no audio.  Tried set of headphones
>> in rec jack -- still no audio.
>
> You said all working fine above. "Unit"? Which unit? All of them? I'm confused?
>
>>
>> Tried the same with Daily 20150530, no errors,
>> no change.
>>
>> did keyboard reset, no errors, no change.
>>
>> Any possible setting that could cause this,
>> or DOA audio output?
>>
>> tnx es 73 de Bill WB2SXY
>> --
>
> I has someone send me a "factory" image from a radio with N5R firmware
> within the last couple of days that appeared to have been cross-loaded
> with BFB firmware at the factory. That would cause a radio not to
> receive.
>
> How about attaching your original downloaded image files?
>
> Jim KC9HI
> _______________________________________________