[chirp_users] TYT TH-9800 Plus

Mike va3mw va3mw at portcredit.net
Sun Jul 26 05:24:36 PDT 2015


The problem is the port. Try changing the port number in control panel to something lower than 8. 

Chirp has to see the same port number as the cable you are using for it to work.  That is your problem. 

Mike



> On Jul 26, 2015, at 7:58 AM, Jeremy Dieringer <jdieringer1028 at sbcglobal.net> wrote:
> 
> I am on my 2nd day of trying to program this TYT TH-9800 plus.
> I installed the correct USB driver.
> 
> Tried in CHIRP repeatedly with various ports and keep getting "Communication" error. (Failed to communicate with the radio: Unable to communicate with the radio)
> 
> My radio is currently Port 14 - however this does not show up in the list in CHIRP. Even When I manually put it on port 3,4,5, no success.
> Same with TYT software, it seems like it ONLY wants port 3, however when I place on port 3, no success.
> 
> Very frustrating.
> 
> By the way - this link doesn't work (404 error) http://chirp.danplanet.com/download/beta/
> 
> 
> 
> I'd appreciate any help - Thank you
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150726/35713fd3/attachment-0002.html 


More information about the chirp_users mailing list