[chirp_users] Error- Radio rejects download

Jim Unroe rock.unroe at gmail.com
Thu Jul 16 13:39:56 PDT 2015


On Thu, Jul 16, 2015 at 12:28 PM, Thomas Zeller <kb0orz at yahoo.com> wrote:
> I have a Baofeng UV-5R radio and am attempting to download from radio and
> get the error that radio rejects download. I have the programming cable for
> the radio from Baofeng and it is a USB on the computer end. I even attempted
> to use another port on the computer.I get it to download from radio but
> gives me a new set of downloads. I then take the program I had manually set
> up on a Chirp screen and then export/import to the new download set up when
> downloaded to radio. I then attempt to download to radio. It will not clone
> and it says radio rejects clone, or radio rejects download. The manual does
> not have much information that came with the radio. I thought if I did a
> factory reset on the radio and wipe out all that was on the radio and then
> do the download from and to radio it might work but i can not find where to
> even do a factory reset on the radio. Any assistance would be appreciated
>
> Thomas Zeller KB0ORZ
> 417-540-2955

Tom,

When you can download from a Baofeng radio to CHIRP, but get an error
when you try to upload from CHIRP to your Baofeng radio, it is usually
because you are running the CHIRP v0.4.x stable build (or a very old
CHIRP daily build). The now over 1 year old stable build should not be
used with Baofeng radios. If you aren't already, you should download
and use the latest CHIRP daily build that is compatible with your
operating system.

http://trac.chirp.danplanet.com/chirp_daily/LATEST/

Jim KC9HI



More information about the chirp_users mailing list