[chirp_users] Baofeng UV-5R and settings/squelch_levels

[Larry]

Oops sorry


-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of David Ranch
Sent: Sunday, July 19, 2015 12:24 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng UV-5R and settings/squelch_levels


Larry,

Please refrain from taking over other people's posts (Pavel started this specific thread on Squelch issues) for getting help with your issue (Windows execution issue).

--David
KI6ZHD


On 07/19/2015 09:57 AM, Larry wrote:
> I can't even get Chirp to come up I keep getting the error:
> C:\Program Files\CHIRP\chirpw.exe
>      The application has failed to start because its side-by-side configuration
>      is incorrect. Please see the application event log for more details.
>      I am using chirp-daily-20150702-installer and the cable driver I am using is
>      Win_Driver_Prolific_3.2.0.0 and it works fine on Windows 7 and 10
>
> -----Original Message-----
> From: chirp_users-bounces at intrepid.danplanet.com 
> [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Pavel 
> Milanes Costa
> Sent: Sunday, July 19, 2015 10:21 AM
> To: chirp_users at intrepid.danplanet.com
> Subject: [chirp_users] Baofeng UV-5R and settings/squelch_levels
>
> Hi, I'm new to the list...
>
> I was searching the list archives for this, but found no answer, so here it goes...
>
> The squelch levels for VHF/UHF on the settings > service settings options do work for the Baofeng UV-5R?
>
> My Baofeng is about 10uV in VHF and ~2.0uV on UHF, so VHF reception is hard, may be it has to do with the SQ level, it has 25 as SQL 0 for VHF and 19 on SQL 0 for UHF.
>
> So before I play with that values I want to know if this setting will really work with my radio.
>
> I'm using chirp-daily-20150702 here...
>
> 73,
>
> --
> M.Sc. Pavel Milanes Costa, CO7WT
> SYSOP Nodo Gateway CO9JAZ
> Ciudad de Camagüey, Camagüey, Cuba.
> Cell: (+53) 53-847819
>
> Este email fue enviado usando packet radio a 9600 baudios This email 
> was sent using Amateur Packet Radio at 9600 baud
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> To unsubscribe, send an email to 
> chirp_users-unsubscribe at intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com