[chirp_users] Baofeng cable

Michael D Earls mikeearls at earthlink.net
Sat Jan 24 16:49:54 PST 2015


Tony, you're not helping!

Until the older driver is installed properly, it won't recognize the cable.

Unless every step is followed EXACTLY, the older driver won't be installed.

Take it from someone who was convinced that I had followed every direction, several times.

When you finally do it right, it will work.
 
Mike Earls
AF5MS
TSRA Life Member
NRA Benefactor Member
 
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Tony
Sent: Saturday, January 24, 2015 6:39 PM
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] Baofeng cable
 
He’s not even at the point where drivers are needed. 
 
He can’t even get Windows to recognize the cable.
 
Repeating “Read the instructions”  over and over without offering any actual advice is a waste of everybody’s time.
 
C’mon…
 
-Tony
 
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Jim Unroe
Sent: Saturday, January 24, 2015 7:36 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Baofeng cable
 
Follow the instructions in the guide step by step to select it. If you don't select it as shown in the guide, Windows will continue to use the latest driver and the programming cable will continue to fail to function properly.
Jim
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20150124/20700aba/attachment-0002.html 


More information about the chirp_users mailing list